01 / 10 / 2021
Theoretical background of using IMU which includes (Accelerometer , Gyroscope, Magnetometer)
01 / 10 / 2021
Lit review critically evaluates the robotic phenomenon of inertial sensors algorithms using IMU (Accelerometer
01 / 10 / 2021
After structural analysis of the Rocket motor casing it is clear that the stress developed at various locations
01 / 10 / 2021
a) The objective: To study and analyse the characteristics of METAL MATRIX COMPOSITE( mmcs ).
01 / 10 / 2021
This assignment addresses the following objectives for the course as outlined in the course specification:
01 / 10 / 2021
Q1.At the instant depicted, assume that the particle P, which moves on a curved path,
01 / 10 / 2021
Create the Quality chains required for the specific assembly which will guarantee the workability of the design;
01 / 10 / 2021
Project 1: Determine the design flow for the transmission pipes RA, AB and BC shown on the figure below.
01 / 10 / 2021
Assess the suitability of machine tool types for the production of following components and geometries.
01 / 10 / 2021
You are a Chief Engineer on a large tanker 180,000 Dwt installed with large slow speed
01 / 10 / 2021
The following figure shows a rotating shaft carrying a steady downward load F at C, which is supported by two bearings at A and B.
01 / 10 / 2021
Using Jury’s test, determine the stability of a discrete-time system whose characteristic polynomial is given by:
01 / 10 / 2021
This project is by design very open-ended. You may need to make several assumptions or develop your own approach to complete the task.
01 / 10 / 2021
This coursework aims to develop a number of key capabilities required in the mechanical product innovation process.
01 / 10 / 2021
: Apply for an Informal Review. This must be made within 3 months of the date of the original assessment outcome letter.
01 / 10 / 2021
Uniform acceleration A rocket lifts off from a launch pad on earth has has a mass of 10000 kg
01 / 10 / 2021
Dissertation topic, assessment of energy usage for hotels using alternative energy sources
01 / 10 / 2021
1. A Perspective Drawing – a descriptive three-quarter view produced using a perspective
01 / 10 / 2021
A new compact gear train is under design with a view to achieve a high ratio of torques in a small space for a given power.
01 / 10 / 2021
Project requirements Describe the new material from a material science/engineering perspective.
01 / 10 / 2021
1. Write a research paper (Times New Roman; 12 point; 1.5 spaced) on an assigned natural polymer.
01 / 10 / 2021
You are required to design and develop a standard four door saloon front door Central Door Locking
01 / 10 / 2021
For the frame and design loads shown in Figure-1, determine the moment amplification factor s for all of the columns
01 / 10 / 2021
a. Present to the audience your research topic using Power Point slides. This presentation must be based on your Research Proposal.
01 / 10 / 2021
Describe how the presence of ice / snow can affect the operation of gas turbine engines.
01 / 10 / 2021
A screw jack has a single start thread of pitch 6 mm and is used to raise a load of 250kg
01 / 10 / 2021
..Part 1 examines the Regulations and explains their meaning, their application and who is responsible for their application.
01 / 10 / 2021
Compare their advantages and disadvantages quoting actual service examples and performance data to support the findings.
01 / 10 / 2021
It is industry study report, we submitted all required documents. In this assessment item,
01 / 10 / 2021
A project plan will be prepared that will detail what activities the student will undertake
01 / 10 / 2021
Question 1: Solar Thermal Energy – 120 marks Analyse solar energy available for a thermal application
01 / 10 / 2021
List the five theoretical layers of the atmosphere. With the aid of graphs state the ISA international Standards
01 / 10 / 2021
This assessment task exposes students to the innovative characterisation techniques and technologies
Our Services
FLAT 50% OFF ON EVERY ORDER. Use "FLAT50" as your promo code during checkout