Pre-existing damage is identified and reported to appropriate persons according to company requirements.

1

Assess furniture and fittings to be cleaned.

1.1

Furniture and fittings  are assessed, work order  is reviewed according to company requirements , and issues are clarified with appropriate persons . 

1.2

Hazards  are identified and risks controlled in work site according to legislative , occupational health and safety  (OHS) and company requirements .

1.3

Type and condition of furniture and fittings are identified by observation according to work order and company requirements.

1.4

Soil type  is identified by observation according to work order and company requirements.

1.5

Cleaning techniques  are selected according to work order and company requirements.

1.6

Size and usage pattern of work site are determined to ensure safety of personnel  and efficient use of equipment  and chemicals .

1.7

Pre-existing damage is identified and reported to appropriate persons according to company requirements.

2

Select equipment and chemicals.

2.1

Personal protective equipment  (PPE) is selected and used according to manufacturer specifications , and OHS and company requirements.

2.2

Equipment and chemicals are selected for work order according to OHS and company requirements.

2.3

Operational effectiveness of equipment is checked according to manufacturer specifications and company requirements.

2.4

Equipment is adjusted to suit operator’s requirements according to manufacturer specifications and OHS requirements.

2.5

Chemicals are prepared according to manufacturer specifications, and OHS and company requirements.

3

Prepare work site.

3.1

Hazards in work site are confirmed and risks are controlled and reassessed according to legislative, OHS and company requirements.

3.2

Signage and barriers  are installed as required to maximise public safety during cleaning operation according to work order, and OHS and company requirements .

3.3

Furniture and fittings that impede cleaning operation are moved according to work order, and OHS and company requirements.

3.4

Floor, furniture and fittings are covered by drop sheets as necessary according to work order and company requirements.

3.5

Work restrictions  affecting completion of work order are identified and appropriate persons are notified.

4

Clean furniture and fittings.

4.1

Soil is removed from surfaces , and furniture and fittings are washed using equipment, PPE, chemicals and cleaning techniques.

4.2

Work area is restored according to work order and company requirements.

4.3

Work is performed according to work order, manufacturer specifications and legislative, OHS and company requirements.

5

Tidy work site.

5.1

Collected soil and waste  are disposed of according to client specifications, work order, manufacturer specifications and legislative, OHS, company and environmental requirements .

5.2

Furniture and fittings are replaced according to client requests, work order and OHS requirements.

5.3

Signage and barriers are removed according to work order, and OHS and company requirements.

6

Clean and safety check equipment, and store equipment and chemicals.

6.1

Equipment and PPE are cleaned according to manufacturer specifications and environmental, OHS and company requirements.

6.2

Equipment and PPE are safety checked according to manufacturer specifications and OHS requirements and required maintenance is recorded according to company requirements.

6.3

Equipment and PPE are stored and maintained to allow ready access according to manufacturer specifications, and OHS and company requirements.

6.4

Chemicals are stored according to manufacturer specifications, and OHS and company requirements.