This paper circulates around the core theme of For the purposes of examining its transverse (vertical) vibration, a bridge may be modeled as a rectangular cross-section, clamped/clamped beam. together with its essential aspects. It has been reviewed and purchased by the majority of students thus, this paper is rated 4.8 out of 5 points by the students. In addition to this, the price of this paper commences from £ 99. To get this paper written from the scratch, order this assignment now. 100% confidential, 100% plagiarism-free.
For the purposes of examining its transverse (vertical) vibration, a bridge may be modeled as a rectangular cross-section, clamped/clamped beam. The direct response of the bridge at its mid-point needs to be damped. The two side rails of the bridge may also be considered to be clamped/clamped beams of rectangular crosssection. It is proposed to insert some rubber between the rails and the bridge at their mid-points. It is required to minimize the maximum mid-point response of the bridge up to a frequency twice the first natural frequency of the bridge without rails.
The two rubber inserts behave as mass less springs and hysteretic damping elements, each with a characteristic k (1+i). Each team will be given values for L, Bb, Db, Br and . The object is to minimize the maximum response by finding the optimum values of Dr and k. The material of the bridge and rails is the same with density = 7800 kg/m3 and elastic modulus E = 2 1011 N/m2. Parameters are L=10m, Bb =1.5m, Db= 0.25m, Br=0.085m, Alpha= 0.2