0% Plagiarism Guaranteed & Custom Written

(a)Draw the scatter diagram for these two variables.

19 / 01 / 2019 Economics

This paper circulates around the core theme of (a)Draw the scatter diagram for these two variables. together with its essential aspects. It has been reviewed and purchased by the majority of students thus, this paper is rated 4.8 out of 5 points by the students. In addition to this, the price of this paper commences from £ 48. To get this paper written from the scratch, order this assignment now. 100% confidential, 100% plagiarism-free.

CASE STUDY ONE

In this Case Study, you will look at modelling the Australian dollar vis-á-vis the US dollar exchange rate, using a conventional monetary model.  The data you will use is in the file called “The Monetary Model.xls”.  This contains the following data: ‘S(AUD/USD)’  , which is the Australian dollar per US dollar exchange rate; ‘Aust. MS’  , which is the level of the Australian money supply; ‘US MS’  , which is the level of the US money supply; ‘Aust. GDP’  , which is a measure of Australian gross domestic product (GDP); ‘US GDP’  , which is a measure of US gross domestic product (GDP); ‘Aust. IR’  , which is a measure of short-term Australian interest rates, and ‘US IR’  , which is a measure of short-term US interest rates.  Data on these variables were collected from the IMF’s International Financial Statistics database, and from the Reserve Bank of Australia’s website.

 To begin the empirical analysis, make sure you take the natural logarithm of S(AUD/USD), Aust. MS, US MS, Aust. IP, and US IP.  Leave the interest rate variables, Aust. IR and US IR, in their raw form.  Also, use a level of significance of  = 0.05 for all tests in this study.

(aCalculate the correlation between the spot exchange rate and all the other variables.  Which variable has the strongest correlation with the exchange rate?  I will call this variable “PREDICTOR” in the questions that follow.

(b)Calculate the mean, median and mode of the spot exchange rate. What is the difference between these types of “averages”? State what you think is the most appropriate average for this set of data, giving brief reasons for your answer.

(c)Draw a histogram of the spot exchange rate.  Calculate the variance, measure of skewness and kurtosis.  Compare the values of the median and mean.  Do they indicate the data is symmetric, and is this confirmed by the value of the skewness?  Comment on the value of kurtosis.  Based on these results, say why you believe that the spot exchange rate does, or does not, have a normal distribution.

(d)Calculate the mean and variance of the PREDICTOR for the time period 1984:1 to 1992:4, and then for the period 1993:1 to 2013:4 separately.  Using these figures, calculate the variance of the difference between the sample means for the period 1984:1 to 1992:4, and then for the period 1993:1 to 2013:4 (You can assume that the covariance is zero).  In the first quarter of 1993, the Reserve Bank of Australia adopted an inflation targeting regime.  Test to see whether the adoption of an inflation targeting regime has had any impact on PREDICTOR, that is, test to see whether the difference is significantly different from zero. Under the conditions discussed in part (e), the standardised value of the difference will have a Student’s-t distribution with n-2 degrees of freedom (Subtract 1 for each sample mean calculated).

(e)The test in part (d) is only reliable if both samples are large, or if a sample is small, it has a normal distribution.  Do you think the test in part (d) is reliable? Give brief reasons for your answer.

CASE STUDY TWO

In this Case Study, you will be looking at the effect of the 2010 Federal Election on the Australian stock market.  In the file called “2013 Federal Election.xls”, there is daily data from the 1st of January 2013 until the 31st of December 2013, on the Australian All Ordinaries index and the MSCI world index.  You will be looking at two important dates: the day the stock market opened after the election was called, that being the 31st of January 2013, and the day the market opened after Tony Abbott’s election win, which was the 16th of September, 2013.

(a)Obtain line graphs for both over the whole period and comment on any similarities or differences.

(b)Calculate the continuous returns on both indices. Obtain histograms and descriptive statistics up to, and including the 30th of January, between the 31st of January and the 13th of September, and from the 16th of September onwards.  Comment on any similarities or differences between them.

(c)For the Australian All Ordinaries index, calculate the 95% confidence intervals for the mean return in the three periods given in part (b).

(d)Assume that the returns on the All Ordinaries index has a normal distribution. Using the means and standard deviations previously calculated for each of the three periods, find the probability of getting a negative return on a day selected at random.

(e)Write some brief notes, in point form, describing your results for Case Study Two.  Be sure to report any conclusions that you have made, and submit these.  You will use them in a later tutorial when you write your final report.

CASE STUDY ONE - continued 

In this section, you will estimate a simple linear regression model to fit the exchange rate.  From Assignment One, choose the input variable that has the strongest correlation with the exchange rate that you believe will produce a good model (this is the variable that we called “PREDICTOR”).  

Following on from Assignment One, use the same data set and a level of significance of  = 0.05 for all tests in this study.

(a)Draw the scatter diagram for these two variables. 

(b)Estimate the model to predict the exchange rate.  How much of the variation in the exchange rate is explained by your model?  Is this statistically significant?  Test to see whether the intercept is required in your model.

(c)Obtain a graph of the residuals vis-á-vis the independent variable for part (b).  Is there any evidence of problems?   

CASE STUDY TWO - continued

In the next stage of this study, you will estimate betas for the Australian stock market vis-á-vis the world using the data in the file called, “2013 Federal Election.xls”.  You will need the returns you calculated from a previous tutorial.  You will also use the three sub-periods you used before, that is, the period before the election was called, the period during the election campaign, and the period after the election result.  In this analysis, you will treat Australia as the share and the world as the market

(a) Draw scatter plots of the three pairs of returns you will use for estimating the market models.

(b) For the three sets of returns in each of the sub-periods find the betas using the Market model 

Here the dependent variable is the ‘raw’ or ‘actual returns’ ( ) for Australia and the independent variable is the ‘actual market returns’ ( ).  Once you have estimated these betas use the ‘F’ statistic and the value of R2 to evaluate these estimated models.

(c) For each of the sub-periods, test to see whether Australia is passive or neutral using  = 0.05. That is, test whether  .

(d) For the first sub-period, estimate the Scholes-Williams Beta and Dimson’s Beta.  Do you think you need to use this sort of adjustment here?

(e) Write some brief notes, in point form, describing your results for Case Study Two.  Be sure to report any conclusions that you have made, and submit these.  You will use them in a later tutorial when you write your final report.

CASE STUDY ONE - continued

Consider the model you fitted in Assignment Two, Case Study One, part (b).  

(a)Test to see if the errors are autocorrelated.  If autocorrelation is present, suggest possible reasons why.   Try to correct it by including the appropriate number of autoregressive moving average (ARMA) terms.

(b)Test to see if the errors are heteroscedastic.  If it is present, obtain an improved set of estimates for the t-statistics.

(c)Test to see if the errors are normally distributed.  Based on the results of the three tests you have carried out, how reliable do you think the estimation and test statistics are?

(d)Now estimate a new Multiple Regression Model that uses all of the variables, as well as your original PREDICTOR variable.  That is 

 (e)Identify the coefficients with large p-values.  Eliminate the variable with the largest p-value, and re-estimate the new equation.  Repeat this procedure until the only variables left in the model have coefficients for which the p-value is less than  = 0.05.  Show the output for this final model (This is called the ‘top-down’ approach).

(f)Use the F-test for redundant variables to determine whether the joint impact of all the variables that you have excluded is significant.

(g)Based on the results of part (f), and any other tests you think are necessary, choose a model you think contains all the relevant variables. 

(h)Obtain a set of (static) forecasts for the Australian dollar exchange rate.  Asses the quality of your forecasts using the various error measures generated when you made your forecasts.

Write a brief report discussing your results. You should comment on the reliability of your estimation and test procedures, the variables that are most important in explaining the exchange rate, and how well your model predicts the exchange rate. 

CASE STUDY TWO - continued

Returning to the election question, you will investigate if there have been any significant changes in the market models. To do this, you should first generate some dummy variables.  The first, DA1, should equal zero up until the 30th of January, one between the 31st of January and the 13th of September, and then zero from the 16th of September onwards.  The second, DA2, should equal zero up until the 13th of September, and then one from the 16th of September onwards. The variable, DE1, should have a value of zero, except for the 31th of January, when it will have the value of one, and the variable DE2 should have a value of zero, except for the 16th of September, when it will have the value of one.

(a)Estimate a single market model, as in Case Study Two, for the period when the election was called, and when the election was decided.  Include the relevant additive dummy variables, DA1 and DA2, the two event dummy variables, DE1 and DE2, and the appropriate multiplicative dummy variables for when the election was called, and when it was decided.

(b)Test to see if the models contain any first-order autocorrelation. If they do, correct for it by including the appropriate number of ARMA terms.

(c Using the appropriate t and F-tests, see if there are any differences in the models for the period when the election was called, and when the election was decided.

(d)Using your answers to the above questions, and the notes from the previous tutorials, briefly discuss whether the federal election has had any effect on the performance of the Australian stock market relative to the rest of theworld (Do this in a couple of paragraphs). 


100% Plagiarism Free & Custom Written


International House, 12 Constance Street, London, United Kingdom,
E16 2DQ

Company # 11483120

STILL NOT CONVINCED?

We've produced some samples of what you can expect from our Academic Writing Service - these are created by our writers to show you the kind of high-quality work you'll receive. Take a look for yourself!

View Our Samples

Benefits You Get

  • Free Turnitin Report
  • Unlimited Revisions
  • Installment Plan
  • 24/7 Customer Support
  • Plagiarism Free Guarantee
  • 100% Confidentiality
  • 100% Satisfaction Guarantee
  • 100% Money-Back Guarantee
  • On-Time Delivery Guarantee